Caliber Stamford ConcreteCaliber Stamford Concrete(475) 333-3026
Caliber Stamford Concrete
(475) 333-3026Get an estimate

Concrete contractor in Riverside, CT - driveways, patios and steps built to sit flat

Caliber Stamford Concrete is a concrete contractor based in Stamford. In Riverside, CT, we build and replace driveways, patios, walks, steps, retaining walls and foundations for homeowners and property managers.

Get an estimate(475) 333-3026
Curving concrete sidewalk beside a stone house, with a gravel bed, potted plant, and black metal bench.

How we see Riverside from the driveway

Riverside is a short drive from our base in Stamford. The concrete we're asked about here is the kind that comes with a house and gets used every day, like the driveway, the front walk, the back patio and the steps between them. The work runs much the same as it does next door in Cos Cob and across the rest of Greenwich, with the same winters to plan around.

Older driveways and patios have usually had decades to settle, crack or tip toward the house. So the job tends to start with breaking out the old concrete and seeing what it sat on, because that tells us more than the cracks on top ever will.

Concrete services we offer in Riverside

We handle the full run of concrete work in Riverside, from a cracked front walk to a new foundation, and we're best known for driveways, patios and steps that drain right. Every job gets planned from the bottom up. Before we talk finishes, we look at what the slab will sit on, where the water runs and how we'll get concrete to the spot, because those three things decide whether the top lasts.

  • Concrete driveway building

    A driveway on an older lot usually cracks where the base gave out first. We dig out the soft ground, pack a new base and pitch the slab so water runs off.

    Explore service

  • Concrete patio construction

    Back patios often tip toward the house, so rain sits against the foundation. We set the slope away from your walls before we pour, so the water goes to the yard instead.

    Explore service

  • Stamped concrete services

    Some homeowners want a patio or walk that looks like stone without the cost of setting stone. We press the pattern into fresh concrete and seal it so the color holds up.

    Explore service

  • Concrete sidewalk building

    Front walks heave and trip people once roots and frost get under them. We pull the lifted sections, rebuild the base and pour a new walk with a broom finish for grip.

    Explore service

  • Garage floor concrete

    Garage floors crack and settle at the door, and water off the car pools in the low spots. We break out the old slab, pour a new floor and slope it toward the door.

    Explore service

  • Decorative concrete

    Some houses call for more than plain gray, like a colored border along a walk or a patio that matches the trim. We plan the color and finish with you before the truck arrives.

    Explore service

  • Concrete retaining walls

    A sloped yard needs a wall to hold the dirt back before a patio can sit flat. We build it with drainage behind it, because water pushing on a wall is what tips it.

    Explore service

  • Concrete floor installation

    A basement or shed with a cracked or dirt floor is hard to use and harder to keep dry. We prep the ground and pour a flat, reinforced floor you can build on.

    Explore service

  • Concrete pool decks

    Pool decks stay wet, so a slick finish or a deck that drains toward the pool causes trouble. We pitch it away from the water and give it a textured finish for bare feet.

    Explore service

  • Concrete steps construction

    Front steps often pull away from the house or crack after years of freezing winters. We rebuild them on solid footing with every step the same height, so nobody trips on the odd one.

    Explore service

  • Slab foundation building

    An addition, garage or pool house needs a slab that stays put under the walls. We dig to firm ground, pack the base, set rebar to tie the slab together and pour it level.

    Explore service

  • Foundation installation

    New construction and big additions start with walls and footings that carry the whole house. We form and pour them to the plans, on ground we've checked first.

    Explore service

  • Concrete parking lot building

    Property managers call us when a small lot has turned into patches and potholes. We plan the pour in sections so part of the lot stays open, and we slope it to the drains.

    Explore service

  • Concrete footings

    Decks, porches and garden walls lean on footings, the concrete that sits below the frost so they don't heave. We dig them to the depth the job calls for and pour them solid.

    Explore service

  • Foundation raising

    When a slab or a corner of the house has dropped, the cause is usually soft ground or water underneath. We find out which first, then raise and support what sank.

    Explore service

  • Concrete cutting

    Running a new drain line, widening a doorway or taking out a bad section means cutting through concrete cleanly. We saw-cut along straight lines so the rest of the slab stays intact.

    Explore service

What concrete driveways, patios and steps look like

These photos show the kinds of concrete work we do, from digging out and packing the base to the finished surface. They're examples of the trade, not pictures of jobs in Riverside.

  • Concrete driveway with light gray slabs and red brick borders, beside a parked golf cart and landscaped yard.

  • Textured concrete pool deck surrounding a swimming pool, with patio steps and a covered seating area.

  • Covered patio with a dark stamped-concrete floor beside a smooth concrete slab, garden, and wooden fence at sunset.

Working in Riverside: permits, price and schedule

A concrete job in Riverside runs through Greenwich, so the paperwork and the start date follow its process. Here's how that shapes your job, and what changes the price and the timing.

Greenwich's building office handles Riverside permits

Riverside is a neighborhood of Greenwich, so the Town of Greenwich is the local government for your job, and its Building Inspection Division at Town Hall takes building permit applications. Its permit list names work like additions and decks but not driveways or patios. That doesn't settle whether yours needs one, and your start date waits on the answer.

Before we start, we check with the building office and tell you what it wants for your job. If a permit's needed, we handle the application with you. If the office hasn't given an answer yet, we tell you that too, because a start date built on a guess is just a guess with a concrete truck behind it.

  • Town Hall's phone is 203-622-7700 if you'd rather ask them yourself.
  • Each Greenwich permit type has its own requirements, so we ask about yours.
  • Most interior renovations need a building permit too, including structural changes.

What moves the price and the schedule

The price turns on what's under and around the slab as much as the slab itself. Size and thickness matter, and so does tearing out an old driveway, how much soft ground has to come out before we pack a new base, and whether a truck can back up to the forms or we're wheeling concrete around the house. Stamped or colored finishes add to it too.

The schedule turns on the permit answer, the weather and the cure. We'd rather move a pour than do it in midday heat or a hard freeze, because both leave a weak, dusty top you'd be sweeping for years. Then comes curing, the wait while the concrete gets strong enough to take weight, so you'll walk on it well before you drive on it.

  • Your own number comes from the written estimate, which shows what's in it.
  • If we find soft ground under the old slab, you'll hear about it first.
  • Pouring a driveway in halves can keep one car moving, at some extra cost.

Get a free on-site estimate for concrete work in Riverside

We reply within one business day, the estimate is free and there's no obligation to book. I come out to Riverside myself to walk the job, measure it and send you a written estimate.

(475) 333-3026

What we see on Riverside driveways, patios and yards

Houses here come with the same handful of concrete problems we see across Greenwich and Stamford. These are the ones that usually shape the job before anyone mixes a yard of concrete.

  • Driveways that sank with the dirt

    A driveway that dips or splits down the middle usually isn't the concrete's fault. The ground under it was raked level instead of dug out and packed, so it settled and took the slab along for the ride.

  • Lots close to the water

    Riverside has waterfront on the Mianus River, Cos Cob Harbor and Long Island Sound. On a lot near the water, we look hard at where rain and runoff go before we set a form, because water working under a slab is how a good pour turns into a sinking one.

  • Chipping after hard winters

    Connecticut winters bring freeze, thaw and road salt, and a slab with a weak top shows it first as chipping and flaking. That weakness usually starts on pour day, with too much water in the mix or a top finished too early.

  • Slabs patched more than once

    Plenty of slabs we look at have been patched, resurfaced or sealed over more than once. A patch over a crack that's still moving just cracks again, so I'll tell you straight when a slab is past patching and when it still has years in it.

  • Cracks in places nobody chose

    Concrete cracks. The question is where. A crack wandering corner to corner usually means the control joints, the grooves that give a crack a straight line to follow, were cut late or skipped. On a new slab we cut them while the concrete is still fresh, so any crack has somewhere to go.

Why hire a Stamford-based concrete contractor in Riverside

We're a concrete crew based in Stamford, working in Greenwich, its neighborhoods and the cities around it. Here's how we run a job, and the parts of it I won't hand off.

The base comes first, even when it's hidden

On day one, nobody sees the base. It's gravel and packed dirt under the forms, and it's usually the first thing a tight budget cuts, because a slab on a skimpy base looks just as good the week it's poured. It just doesn't stay that way. The subgrade, the ground the whole slab sits on, decides whether your driveway stays flat.

So if something has to give, I'll trim the finish before I trim the prep. A plain broom finish on a solid base usually outlasts a fancy stamped pattern on a weak one. I'd rather spend an extra hour on prep and tell you up front where a crack might show than explain it to you later.

  • On site for the steps that matter

    My crew does the work, and I'm on site for the steps that matter most, like checking the packed base and the slope before the forms get filled. Those are the parts you can't fix once the truck has emptied.

  • Licensed and fully insured on every job

    We're licensed and fully insured on every job in Riverside and everywhere else we work. Ask to see the insurance before we start, and if something on your property gets damaged while we're there, that's what it's for.

  • Landscaper first, concrete since 2017

    I ran a landscaping business for years before I got into concrete, and I started this one in 2017. Years of grading yards taught me to watch where the water runs, which is half of what keeps a slab flat.

  • Satisfaction guaranteed, starting with a call

    Satisfaction guaranteed. If something about the job bothers you, tell me and we'll talk it through. When you're ready, call (475) 333-3026 or send the form, and I'll come out to Riverside and take a look.

Questions about concrete work in Riverside, CT

Most of what changes a concrete job in Riverside comes down to Greenwich's permit process and what's under the old slab. These are the questions worth asking before anyone pours.

Do I need a permit for a concrete retaining wall in Riverside, CT?

Yes, if the wall is over 3 feet tall, because Greenwich requires a building permit for retaining walls over that height. For a lower wall, ask the building office about your plan, and we check with them before we set a form either way.

How do I schedule inspections on a building permit in Riverside, CT?

The permit holder schedules them with Greenwich's building office once the permit is issued. A job can need several inspections at stages such as foundation and final, and each key stage is approved before work moves to the next. On footings or a foundation, the next pour waits on that sign-off, so it helps to settle who holds the permit before we start.

How do I file a building permit in Greenwich for work in Riverside?

You file it in person, because Greenwich takes building permits by email only for re-roofing, re-siding and replacement windows on one- and two-family homes. A retaining wall or foundation permit goes to Town Hall along with every other building permit.

How much does a concrete driveway cost in Riverside, CT?

There's no set price, because tear-out, base work, access and finish move a driveway's cost more than its size does. A plain broom finish and a simple shape keep it down, while stamping, color, curves and extra steps push it up. Your written estimate gives you the number for your driveway.

Service areas

Besides Riverside, we work in Stamford, Greenwich, Cos Cob, Norwalk and across the line in Westchester, including Rye, Port Chester and White Plains. If your city isn't on the list, call or send the form and ask.

Ask about your location
(475) 333-3026Get an estimate