Caliber Stamford ConcreteCaliber Stamford Concrete(475) 333-3026
Caliber Stamford Concrete
(475) 333-3026Get an estimate

Concrete Contractor in Rye, NY - Driveways and Patios Built on a Solid Base

Caliber Stamford Concrete pours driveways, patios, steps, walks and foundations for homes and properties in Rye, NY. We're based in Stamford, and I come out to every Rye job myself to look at the ground before anything gets poured.

Get an estimate(475) 333-3026
Curved stone-block retaining wall with a broad cap, surrounding a paved garden seating area with planters.

How Rye's ground and lots shape a concrete job

Rye is a city on Long Island Sound, and parts of its shoreline are salt marsh. The calls we get here are mostly about houses: driveways, patios, front steps and the walks between them, with a footing or a foundation now and then when someone's building on.

This page covers the City of Rye. Rye Brook and Port Chester have their own pages, and your address decides which building office handles your permit, so it's worth knowing which side of the line you're on. On the ground, most Rye jobs come down to two questions: how wet the soil stays, and how much the lot pitches. Both send us back to the subgrade, which is what the slab actually sits on.

Concrete work we do for Rye homes and properties

Every service on this list is available in Rye, and every one starts the same way. I come out, look at the ground, check where the water goes and measure, then write an estimate that shows what's in it. Most Rye calls are flatwork, which is our word for the flat pours like driveways, patios, walks, garage floors and pool decks. The rest is structural work such as footings, foundations and walls, plus cutting or raising concrete that's already there.

  • Concrete driveway building

    Old Rye driveways usually fail where the base gave out underneath. We dig out to firm ground, pack the base and pitch the new slab so water heads for the street.

    Explore service

  • Concrete patio construction

    A patio set close to the house has one job before it looks good, which is keeping water away from your foundation. We set the slope first, then talk finishes.

    Explore service

  • Stamped concrete services

    Stamped concrete looks like stone or brick, but the pattern can't save a slab on a soft base. We prep it like any other slab, then press the pattern in.

    Explore service

  • Concrete sidewalk building

    Walks that have heaved or sunk usually have a root or a washed-out base under them. We fix the cause, then pour with a broom finish, a light texture that gives shoes grip.

    Explore service

  • Garage floor concrete

    A cracked, dusty garage floor in an older house is often a thin slab on whatever fill was handy. We take it out, rebuild the base and pour a slab sized for cars.

    Explore service

  • Decorative concrete

    Decorative concrete covers color, exposed stone and custom edges for a patio, walk or pool area that should match the house. We bring samples, because color looks different beside your siding.

    Explore service

  • Concrete retaining walls

    On a sloping yard, a retaining wall holds the soil back and gives you flat ground. We build it on footings with drainage behind it, because trapped water pushes walls over.

    Explore service

  • Concrete floor installation

    Basements, sheds and additions need floors that stay flat and dry. We pack the base, add rebar, the steel bars that hold a slab together if it cracks, and finish it smooth or textured.

    Explore service

  • Concrete pool decks

    A pool deck sees wet bare feet all summer, so it has to grip and shed water. We slope it away from the pool and pick a finish that isn't slick.

    Explore service

  • Concrete steps construction

    Front steps on older houses tend to pull away from the house or sink at one end as the fill under them settles. We set new steps on footings dug to firm ground.

    Explore service

  • Slab foundation building

    An addition, garage or outbuilding on a slab foundation is only as level as the ground prep under it. We grade, pack and check the base before a single form goes up.

    Explore service

  • Foundation installation

    New foundations for additions and rebuilds have to suit the lot, and on sloped or wet ground that takes planning. We lay out footings and walls to your plans and pour them in order.

    Explore service

  • Concrete parking lot building

    Property managers call about lots with standing water, broken edges and patches on top of patches. We regrade where water collects and pour a slab thick enough for the traffic.

    Explore service

  • Concrete footings

    Decks, porches, walls and additions all sit on footings, the concrete pads that carry the weight down to firm soil. We dig each one to solid ground and pour it before the framing starts.

    Explore service

  • Foundation raising

    A slab or foundation that has dropped usually sits on ground that washed out or was never packed. We find the cause first, because lifting it without fixing that only buys time.

    Explore service

  • Concrete cutting

    Adding a drain line, a doorway or a new walk often means cutting through concrete that's already there. We saw clean lines so the old slab and the new pour meet neatly.

    Explore service

What careful concrete work looks like up close

These photos show the trade, not a particular Rye job. Look at the edges, the joints and the finish, because that's where careful prep and careless prep start to look different.

  • Concrete driveway with light gray slabs and red brick borders, beside a parked golf cart and landscaped yard.

  • Textured concrete pool deck surrounding a swimming pool, with patio steps and a covered seating area.

  • Curving concrete sidewalk beside a stone house, with a gravel bed, potted plant, and black metal bench.

What to know before a concrete job in Rye

Two things shape a Rye job before we ever dig. One is the city's building office and what it wants for your work, and the other is what's under and around the spot you want poured.

The city permit and the county license

In Rye, building permits come from the city's Building Department, which issues them for exterior work as well as interior. Before we start, we ask the department what it wants for your job and tell you. If a permit's needed, we handle the application with you. If the office hasn't answered yet, we say so, because the pour date waits on that answer.

Westchester County licenses home improvement contractors through its Department of Consumer Protection. Contractors applying have to declare any unpaid-wage actions against them, and the county tells them to review the workers' comp board's requirements. That makes the license a fair thing to ask any contractor about before you sign, along with who carries the insurance if someone gets hurt on your property.

  • We check with the city before we start and tell you what it wants.
  • We also ask whether your job goes to the city's Board of Architectural Review.
  • Ask any contractor for their county home improvement license before you sign.

What moves the price and the schedule

The price of a Rye job turns on what's under it and how hard it is to get to. Size and thickness matter, and so does the finish, but tearing out an old slab, digging bad fill out and packing a new base is where the differences show up. A flat patio out back with easy access is about as simple as this work gets.

The schedule turns on three things: the city's answer on your permit, the day we can pour, and curing, the wait while the concrete hardens enough to take weight. I walk the job, measure and send a written estimate that shows what's in it, so you can see where the money goes before you decide.

  • Removing an old slab adds digging, hauling and new base material.
  • Extra depth, rebar and drainage work add labor and material.
  • Stamped and decorative finishes cost more than a plain broom finish.

Get a free on-site estimate for your Rye concrete job

Send the form or call (475) 333-3026 and we'll reply within one business day, with no obligation to book. I come out to your Rye property myself, walk the job and measure, then send you a written estimate that shows what's in it.

(475) 333-3026

What Rye lots and houses mean for new concrete

Every lot is different, but the same few conditions come up again and again on concrete jobs around here. These are the ones I look for first when I walk a property in Rye.

  • Lots close to the water

    On lots nearer the Sound, the ground often stays wet and soft longer than it does uphill. A slab poured on soft ground settles right along with it, so on those lots we dig deeper and pack the base harder before anything gets poured.

  • Yards that pitch toward the house

    Plenty of yards tip toward the house, and a patio or walk laid on that slope hands the water straight to your foundation. We check where the water runs before we set a single form, and we pitch the slab away from the house, even when that means more digging.

  • Long driveways and tight access

    Some driveways here run a long way back from the road or climb up to the house, and some leave no room for a concrete truck to get close. That means more forming and more hand work, so it's one of the first things I look at.

  • Trees close to the drive

    Big trees near a driveway or walk push roots under the slab and lift it at the edges. We talk through the trees before we lay out the job, because the cheapest fix is often moving the slab a few feet rather than fighting the roots.

  • Steps that have pulled away

    Front steps on older houses often lean or pull away from the wall because they were set on fill instead of footings. Patching the cracks hides it for a while. The real fix is usually new steps on footings dug to solid ground.

How we run a concrete job from estimate to cleanup

I started this business in 2017 after years in landscaping, where the patios and walks were the part I liked best. Here's how we work now, and why.

The base comes first, even when it's hidden

On pour day, nobody looks at the base. It's buried under the slab by lunch. That's exactly why it's the first thing people try to cut from a budget, and why I won't. We dig out to firm ground and pack the base in layers, because a nice-looking slab on a bad base is just an expensive crack waiting to happen.

If you need to save money, I'd rather trim the finish than the prep. A plain broom finish on a solid base will usually outlast a fancy stamp on loose dirt. I'll also tell you up front where a crack might show, because I'd rather spend an extra hour on prep than explain it later. To set up a visit, call (475) 333-3026 or use the form.

  • I write every estimate myself

    I come out to look at every job and write the estimate myself, so the person pricing your Rye driveway is the one who's seen the ground. My crew does the work, and I'm on site for the steps that matter most, like checking the base and the pour.

  • Licensed, insured and here since 2017

    We're licensed and fully insured, and we've poured driveways, patios, steps and foundations in Stamford and the cities around it, Westchester included, since 2017. We put one plain promise on every job, satisfaction guaranteed.

  • Joints cut where we choose

    Concrete cracks. It's what it does. Control joints are the straight grooves we cut into the slab so it cracks in those lines instead of across the middle. We cut them on time, because a late or skipped joint means cracks wherever the slab decides.

  • Pours timed away from midday heat

    We schedule pours for the cooler part of the day where we can, because concrete that sets too fast in midday heat can end up with a weak, dusty top. Then we leave you clear instructions for the first few days, so nobody parks on it early.

Questions Rye homeowners ask about concrete work

These are the questions that come up when I walk a Rye property, plus a few the city's own rules raise. If yours isn't here, ask when you call.

Who reviews concrete work on a steep slope or near a wetland in Rye, NY?

In Rye, the city's planning office takes the Steep Slopes Permit and the Wetlands and Watercourses permit, which cover work on steep slopes and work near wetlands or watercourses. Both are on the city's permits and forms page. If your lot pitches hard or sits near water, we bring it up at the estimate, because it can change both the plan and the timing.

How do I find out if my Rye property needs a floodplain permit for new concrete?

Ask the city's building office, which takes Floodplain Management Permit applications and enforces the city's rules for building in FEMA-designated flood zones. Building permit questions go to (914) 967-7372 or building@ryeny.gov. We check with the city before we start, and if it wants a floodplain permit for your job, we handle the application with you.

Do I need a permit to take down a tree for a new driveway in Rye?

Rye has a separate Tree Removal Permit under its Tree Law, so check with the city before any tree comes down for the new work. It's apart from any building permit for the concrete itself. If a tree stands where your driveway or patio would go, I'll flag it when I walk the job.

What causes a concrete driveway to crack and sink?

Most sinking and cracking starts under the slab, with a base that was raked level instead of dug out and packed, or with water running underneath and softening the ground. A new slab will still crack a little, because all concrete does. With a packed base, water sent away from it and control joints cut on time, those cracks mostly stay in the joints where nobody notices them.

How long does it take before I can drive on a new concrete driveway in Rye?

You can walk on new concrete well before you can drive on it, because it keeps getting stronger for a good while after it looks done, and cars weigh a lot more than feet. Heavy trucks wait longer still, so hold off on the moving van. We give you the walk-on and drive-on days for your pour before we start.

How much does a new concrete driveway cost in Rye, NY?

There's no fair number until I've seen the lot, because the ground can move the price as much as the size does. Rock is the big one, since blasting it out needs a separate rock removal permit from the city, and trees in the way or the slope and wetland reviews above add work too. Call (475) 333-3026 and I'll come out and price yours.

Service areas

Besides Rye, we work across Stamford and the cities around it, including Rye Brook, Port Chester, Harrison, Mamaroneck, Greenwich and White Plains. Don't see your city listed? Call (475) 333-3026 and ask.

Ask about your location
(475) 333-3026Get an estimate